2) Use BMW MULTI TOOL or VVDI 2 do CAS4+, and use the data you read out to generate the key data to match programming and simultaneous car
For second steps. If you choose BMW MULTI TOOL, you still need to buy the CAS4 adapter. If you choose VVDI2, then no need to buy others.
A: For this function. If you want to use, you need to open pin,mac reading,CS authorization then can use. If you have bought the condor key cutting machine. Then this authorization is free to open. Please give us your name/country/EmailVVDI SN/ VVDI2 SN / CONDOR SN. If you do not bought CONDOR key cutting machine, then cannot open this authorization.
A: This is normal. Once the day become 1, you just need to connect interent. Then it will be back to 30 days again. This is setted by Xhorse company to avoid others crack their software.
4. 06 range rover sport CEM read ok, made a key with VVDI2 immo data tool.. Great!
A: One user feedback “I did one of these but now how do i add a remote key .. i tried with skp900 to add pcf7941 but it didn’t work.. Is it possible to add a remote key? ? And how please”
if you reset a PCF, you no longer have an option to go back to life, you need a lot of information to be able to use it again, you need flasheROM and eep-extended, it does not only work with hitag pages.
Another option is that they (Xhorse) can give, is to create a firmware download as bmw, for other models
And I think that option will not be available, because to do so removed the vvdi-tools
Another option is someone who passes the firmware for the pcf and remote you need. that option I think no one will give it freely.
What you have left is to leave the PCF blank and your investigate.
If for some reason a manufacturer makes the mistake and does not block the PCF and you are lucky to take that full firmware already have an option for your investigation.
I would also be interested in your firmware 🙂
5.Q: Did you do via via OBD or read dump from bcm2 for safety, there is a case here where attempting to read data via OBD bricked car.
A: It was newbie and he did all key lost by OBD. If you read manual carefully you will see that all key lost need to read BCM2 by BDM first.
Also all keys lost possible by obd. Have to disconnect the bcm2 module then reconnect it in the process. Done a few a4s and q5s all keys lost without problems.
6.today made bmw e91 on cas++ 2 minutes job love this, as it would always be that simple….
7.Q: I tried to use Xhorse VVDI2 do a 2011 Audi Q5 this weekend. Tried initially to read via OBD but no joy. I then took out and read the BCM by BDM and made a dealer key.
Now the ignition wont come on as there’s no start switch. Is there any way to force ignition on? Have I damaged something or bricked it? Any solution will be greatly appreciated.
A: You did spare key or all key lost?? If all key lost you won’t have ignition with dealer key.
You have to put dealer key in slot than press brake pedal and turn off/on lights by light switch simultaneously than enter key learning option and that’s it.
I did q5 from 2011 EU no problem. Car arrived with faulty BCM2 (remote locking did not work), so I made some experiments on this car and have checked all functionality of VVDI2 and had no issue with it.
8.General procedure to make a spare key on A6L / Q7/ EZS-Kessy (JB18)
This is generally the procedure to make a spare key for A6L / Q7/ EZS-Kessy (JB18).
. VVDI 2 -> Key Learn -> 4th Immobiliser System Audi -> A6L / Q7/ EZS-Kessy (JB18)
. Read note: Most cars before 2009 use 9S12DT128 chip and cars after 2009 use 9S12DT(G)256
. Choose appropriate chip above -> Read J518 EEPROM with Working Key -> Write down CS and Pin on a piece of paper -> Save EEPROM
. Type CS and Pin into VVDI 2 -> Type “2” for Number of keys to learn -> Insert 8E chip into VVDI 2 ->Select Make Dealer Key -> Select Key Learning
. Insert dealer key into car and switch on for 2 seconds. Then put second key into ignition within 5 seconds. Then press okay after keys are learned.
VVDI 2 Feedback
Caddy 2014 nec +24c64 2013- , all keys lost, done by service mode, then add key.
BMW cars I have completed with VVDI 2
– EWS 2
– EWS 3
– EWS 3+
– EWS 4
– CAS 2
– CAS 3
– CAS 3++ (ISTAP)