1. I successfully added a key bcm2 on a 2013 audi a5.
1. Q: I do have BMW X5 from 2013+ , it’s F15 with CAS4+ I guess and 5M48H, it has all keys lost. What equipment I should buy from you to make a new key?
A: This is normal. Once the day become 1, you just need to connect interent. Then it will be back to 30 days again. This is setted by Xhorse company to avoid others crack their software.
4. 06 range rover sport CEM read ok, made a key with VVDI2 immo data tool.. Great!
Also all keys lost possible by obd. Have to disconnect the bcm2 module then reconnect it in the process. Done a few a4s and q5s all keys lost without problems.
6.today made bmw e91 on cas++ 2 minutes job love this, as it would always be that simple….
7.Q: I tried to use Xhorse VVDI2 do a 2011 Audi Q5 this weekend. Tried initially to read via OBD but no joy. I then took out and read the BCM by BDM and made a dealer key.
Now the ignition wont come on as there’s no start switch. Is there any way to force ignition on? Have I damaged something or bricked it? Any solution will be greatly appreciated.
You have to put dealer key in slot than press brake pedal and turn off/on lights by light switch simultaneously than enter key learning option and that’s it.
I did q5 from 2011 EU no problem. Car arrived with faulty BCM2 (remote locking did not work), so I made some experiments on this car and have checked all functionality of VVDI2 and had no issue with it.
8.General procedure to make a spare key on A6L / Q7/ EZS-Kessy (JB18)
. Insert dealer key into car and switch on for 2 seconds. Then put second key into ignition within 5 seconds. Then press okay after keys are learned.