Xhorse VVDI PROG Programmer Review

Here ares some user reviews of Xhorse vvdi programmer, some successful, some failed.

First, it is the fine result from vvdi prog tests.

– vvdi prog ok with W221

for w221 ism with ST10F269 read by vvdi prog OK with micromax diagram
for write it didn’t erase automatically you have to erase it before, then all OK .

– xhorse vvdi ok with D70F3571

vvdi prog 4.5.1 D70F3571 read ok

– vvdi programmer no issues with BSI 307 2002

BSI 307 2002 912DG128 – 3K91D
EEP (read and write) – OK
FLASh 4.000Mhz (read and write) -OK — Orange5 clone (DO NOT write flash)
Identical files Vvdi prog and Orange5, same EEP and FLASH.
Incircuit BSI photo of Orange5.

– vvdiprog + eeprom adapter without issues

works fine with eeprom adapter
does not work with test clip tried to different ones,
maybe i should try other one, if there is any higher quality,
or maybe because of cable length it doesnot work

vvdi prog software good at EZS, CAS2, CAS3, CAS3+ …

this programmer can read write EZS, cas2, cas3, cas3+, read other motorolas safe without any problems or damages

But also some unsuccessful experience of vvdi prog programmer

VVDI PROG CANNOT READ 68HC805 FOR IMMO MAZDA 323

– It cannot read hcx05 at all.

VVDI2 full version update to V1.2.6

VVDI2 full version update to V1.2.6

===== VAG V1.2.6 =====
1. Support copy 48 transponder, without binding condor(Menu->Key Learn->4th Immobilizer system – Copy 48 Transponder)
About copy 48 function on VVDI2:
(1). Authorize copy 48 function require 1000 remote points, require buy an extra emulator
(2). You can exchange it with “Transponder Programmer -> Menu -> Points System”
(3). Every success calculate will cost 100 remote points
(4). Copy 48 fucntion use in 4th immobilizer system(Dashboard), support type: NEC24C32, NEC24C64, NEC24C64 colordisplay, A1, A3/TT/R8, Q3, New tiguan 5ND920873B, 5ND920883B etc
(5). Copy 48 fucntion can work on the car that which support read PIN and CS via OBDII. Ofcourse, known CS and PIN is supported. Support make new key, support add keyless GO keys, especially support lost all key。 For Passat B6/CC only support clone 48 transponder(must have working key), don’t support 46 transponder, dont support keyless Go, dont support lost all key
1.About points on VVDI Key TOOL, you can combine to your VVDI2 device and used in VVDI2
In future, points will have more power function, save as more as you can!
2. Fixbug for old A6/Q7 J518 read EEPROM bug
3. Bugfix
===== BMW V1.2.6 =====
1. Bugfix
===== Porsche V1.2.6 =====
1. Bugfix
===== PSA V2.0.7 =====
1. Bugfix
===== Transponder Programmer V1.2.6 =====
1. Points system: Fixbug for verify sub-remote pcb status
2. Bugfix

How to flash ECU through newest VVDI2

Tips for you all to flash ecu via Xhorse VVDI2 commander….

Flash ECU with original flash file: odx, frf, sgo.
Update your VVDI2 software to newest version (now vvdi2 v1.2.6 on 12/09/2016)

For ECU flash, ECU may change the power class, it depends on the flash file you use. (Base on this feature, you can change ECU from 1.8T to 2.0T with suitable flash file).

Note: Before flash ECU, you need switch ON ignition with a working key or the target module with IMMO OFF status. Of course, if the target unit is none about immobilizer, there’s no limit for flash ECU