OBDSTAR X300 PRO3 Key Master information

ESobdii.com X300 PRO3 key master by OBDSTAR Company features with the immobilizer key programming function of SKP900,as well as new function e.g. Odometer adjustment, EEPROM/PIC and OBDII.Its design is fully based on industrial standard, for example, it is designed with bilateral keyboards which make it easy to operate, besides its appearance is processed by special material and reaches to the shockproof level.

4Key Master English Version Configuration: standard configuration:  Immobiliser + Odometer adjustment +EEPROM/PIC+OBDII

OBDSTAR X300 PRO3 Language Available: English
Dealer code: 860755B1

Software Update: Free update online for 1 year on official website.250 usd/year after one year

 

OBDSTAR X300 PRO3 Vehicle Coverage:

BAIC, BENZ, BESTURN, BMW, BRILLIANE, BYD, CHANGAN, CHANGHE, CHERY, CHRYSLER(CHRYSLER/DODGE/JEEP), DFFENGSHEN, DFPV, FAW, FIAT, FORD/LINCOLN, GEELY/HUAPU/SQYL, GM(BUICK/CADILLAC/CHEVROLET/GMC/HUMMER), GREATWALL, HAFEI, HAWTAI, HIMIKO, HNMAZDA, HONDA/ACURA, HONGQI, HYUNDAI, ISUZU, JAC, JAGUAR, KIA, LANDROVER, LIEBAO, LIFAN, LUFENG, LUXGEN, MASERATI, MAZDA, MITSUBISHI, NISSAN/INFINITI, OPEL, PEUGEOT/CITROEN, PORSCHE, PROTON, QQROS, RENAULT, ROEWE/MG, SGMW, SMART, SSANGYONG, SUBARU, SUZUKI, TJFAW, TOYOTA/LEXUS, VW/AUDI/SKODA/SEAT, YOUNGLOTUS, ZZMAZDA, ZZNISSAN, ZOTYE etc.

 

Xhorse VVDI PROG Programmer V4.4.6 update information

Xhorse VVDI PROG Programmer Description:The built-in update software allows user to update VVDIProg firmware timely.High-speed USB communication interface enable the software automatically connect.Smart operation mode: the possible causes of error will be listed.Reserve ports: for future update.The self-test function enable you check if the machine works well.

3

VVDI Prog v4.4.6 (2016-06-23)
* This version DON’t need update
  firmware
* Fix some bugs
* Fix Chrysler 300C IMMO diagram
  error
+ Add VVDI PROG USER MUNUAL 4.4.6
  version in Doc folder
+ Add MC68HC(9)08_MASK_ID.cfg file
  in software folder,list the
  corresponding MC68HC(9)08 seires
  chip type of MASK ID
+ Add HC08AB16A_EEP,
  HC08AS20_EEP,
  HC08AS32_EEP,
  HC08AS32A_EEP,
  HC08AZ0_EEP,
  HC08AZ16_EEP,
  HC08AZ24_EEP,
  HC08AZ32_EEP,
  HC08AZ32A_EEP,
  HC08AZ48_EEP,
  HC08AZ48A_EEP,
  HC08AZ60_EEP,
  HC08AZ60_EEP(1J35D),
  HC08AZ60A_EEP,
  HC908AB32_EEP,
  HC908AS32A_EEP,
  HC908AS60_EEP,
  HC908AS60A_EEP,
  HC908AZ32A_EEP,
  HC908AZ60_EEP,
  HC908AZ60_EEP(4J74Y),
  HC908AZ60A_EEP,
  HC908AZ60E_EEP,
  HC08AS20_EEP_SECURED,
  HC08AS32_EEP_SECURED,
  HC08AS32A_EEP_SECURED,
  HC08AZ0_EEP_SECURED,
  HC08AZ16_EEP_SECURED,
  HC08AZ24_EEP_SECURED,
  HC08AZ32_EEP_SECURED,
  HC08AZ32A_EEP_SECURED,
  HC08AZ48_EEP_SECURED,
  HC08AZ48A_EEP_SECURED,
  HC08AZ60_EEP_SECURED,
  HC08AZ60A_EEP_SECURED,
  HC908AB32_EEP_SECURED,
  HC908AS32A_EEP_SECURED,
  HC908AS60_EEP_SECURED,
  HC908AS60A_EEP_SECURED,
  HC908AZ32A_EEP_SECURED,
  HC908AZ60_EEP_SECURED,
  HC908AZ60A_EEP_SECURED,
  HC908AZ60E_EEP_SECURED options
  in <2-MCU>->
  <motorola-mc69hc(9)08>
+ Add MC9S08GW32_UNSECURED,
  MC9S08GW64_UNSECURED,
  MC9S08JE64_UNSECURED,
  MC9S08JE128_UNSECURED,
  MC9S08LC36_UNSECURED,
  MC9S08LC60_UNSECURED,
  MC9S08LH36_UNSECURED,
  MC9S08LH64_UNSECURED,
  MC9S08LL8_UNSECURED,
  MC9S08LL16_UNSECURED,
  MC9S08LL36_UNSECURED,
  MC9S08LL64_UNSECURED,
  MC9S08MM32_UNSECURED,
  MC9S08MM32A_UNSECURED,
  MC9S08MM64_UNSECURED,
  MC9S08MM128_UNSECURED,
  MC9S08QB4_UNSECURED,
  MC9S08QB8_UNSECURED,
  MC9S08QE4_UNSECURED,
  MC9S08QE8_UNSECURED,
  MC9S08QE16_UNSECURED,
  MC9S08QE32_UNSECURED,
  MC9S08QE64_UNSECURED,
  MC9S08QE96_UNSECURED,
  MC9S08QE128_UNSECURED,
  MC9S08RC8_UNSECURED,
  MC9S08RC16_UNSECURED,
  MC9S08RC32_UNSECURED,
  MC9S08RC60_UNSECURED,
  MC9S08RC8_UNSECURED,
  MC9S08RC16_UNSECURED,
  MC9S08RC32_UNSECURED,
  MC9S08RC60_UNSECURED,
  MC9S08RD8_UNSECURED,
  MC9S08RD16_UNSECURED,
  MC9S08RD32_UNSECURED,
  MC9S08RD60_UNSECURED,
  MC9S08RE8_UNSECURED,
  MC9S08RE16_UNSECURED,
  MC9S08RE32_UNSECURED,
  MC9S08RE60_UNSECURED,
  MC9S08RG32_UNSECURED,
  MC9S08RG60_UNSECURED options
  in <2-MCU>->
+ Add EIS-W203(1J35D),
  EIS-W203(1J74Y),
  EIS-W203(2J74Y),
  EIS-W203(3J74Y),
  EIS-W203(4J74Y),
  EIS-W220(W215)(1J35D),
  EIS-W220(W215)(1J74Y),
  EIS-W220(W215)(2J74Y),
  EIS-W220(W215)(3J74Y),
  EIS-W220(W215)(4J74Y),
  EIS-W639(0L02M),
  EIS-W639(1L02M),
  EIZ-W203(HC12),
  EIZ-W209(HC12),
  EIZ-W211(HC12),
  EIZ-W219(HC12),
  EIZ-W220(HC12),
  EIZ-W230(HC12),
  EIZ-W169(ST12) options
  in <4-IMMOBILIZER>->
+ Add RANGE-ROVER-EWS(2004-08) option
  in <4-IMMOBILIZER>->
+ Add VECTRA(2004-08) option
  in <4-IMMOBILIZER>->
+ Add ARRIZO7,
  ARRIZO-M7 options
  in <5-DASHBORAD>->
+ Add CHANGAN-STAR-9,
  CS75(2014),
  RUIXING options
  in <5-DASHBORAD>->
+ Add MONDEO(2004-07) option
  in <5-DASHBORAD>->
+ Add YINGLUN(2012) option
  in <5-DASHBORAD>->
+ Add HONDA(2014-) option
  in <5-DASHBORAD>->

MB star SD C5 feedback in trucks euro6 euro5

ESobdii.com MB SD Connect Compact 5(SD C4) Star Diagnosis with WIFI for Cars and Trucks updated to the Version: 2016.07

2

 

 

 

 

 

 

MB SD Connect 5 highlights:
1. Supported Multi-Language: English/Bulgarian/Danish/Greek/Spanish/French/Italian/Korean/Polish/Romanuan/Serbo-Croatian/ Turkish/Czech/German/Finish/Hyngarian/Japanese/Dutch/Portuguese/Russian/Swedish/Chinese
2. Support Wireless and Lan cable connection
3. With UDS Chip, support both K Line and CAN BUS Protocol, but also UDS Protocol
4. One MB SD C5 diagnostic tool support Mercedes Benz cars and trucks after year 2000
5. Support offline and online programming, if you need online coding service, please buy Online SCN Coding Service

Here’s the feedback of the tool:

Mercedes Sprinter year 2006 and 2014 works, both the diagnosis

All the personal cars also works, no problem

All the trucks including euro6 also works, no problem

(Test on unimog euro6 and it works, such as Unimog vehicle U20, UGN, UHN diagnostic tool advice, MB SD C5 is advised).

Bus Mercedes Tourismo euro5 year 2010-2012 test works, BUT year 2014 euro6 does NOT work, it says that the license is invalid

Both sdc4 and sdc5, I have tested both on the same cars, to be sure

 

MB SD Connect C4 WIFI no connection in Xentry solution

Recently i have a customer met this problem: When I run my SDConnect C4 with cable in Xentry 05.2016 everything works well. I made configuration the WIFI of PC with the normal procedure with 26xa ec. but when i tried to connect my Wifi of pc with the C4 I got error that there is no connection. i tried different times but nothing happened. The sdconnect is on standby but my PC doesn’t see the Road24h. After a little bit of time in my network connection i can see the Road24h but when I try to connect it gives me error and than the Road24h is not anymore in my network connections.

Finally, I solved by following this step-by-step instruction:

Try this

It worked for me

To save an ad-hoc network and its network key on the guest computer (running Windows 7)

Note down the SSID, security type, encryption type and the key of the ad-hoc network.

Disconnect your connection to any wireless network and switch off/disable your wireless device. Turn on/enable your wireless device but don’t connect to any network. (Thanks GK.)

Click on the network icon in the taskbar.

Click Open Network and Sharing Center > Manage Wireless Networks > Add.

Click “Manually create a network profile”. (This may look silly but we really are going to create an infrastructure network now.)

Enter the network name (SSID), security type, encryption type (if any) and the key that you noted in step 1.

Uncheck both checkboxes (“Start this connection automatically” and “Connect even if the network is not broadcasting”.) [Note that you cannot have the connection start automatically. If you try to have it checked, step 10 will fail. A different way to start it automatically during system boot is described below.]

Click Next > Close. Your connection must appear in the list with the icon suggesting infrastructure (two big screens connected to a tube). Don’t worry about it.

Click Start, type in “cmd” in the search box, press Enter.

In the Command Prompt, type in “netsh wlan set profileparameter name=NetworkName ConnectionType=IBSS”, exactly as shown, without quotes, except you must substitute NetworkName with the SSID (network name) of your ad-hoc network.

If everything went well, you’ll see that the icon has now changed to an ad-hoc icon (three small screens connected to each other) in the Manage Wireless Networks window.

Turn on/enable your wireless device, and try connecting to the Ad-hoc network. You will notice that you no longer need to enter the network key.

To automatically connect to a saved ad-hoc network during Windows boot (can be applied to both guest and host computers running Windows 7)

Click Start > point to All Programs > right-click Startup > click Open. (You may choose Open All Users instead if you prefer).

Right-click an empty space and click New > Shortcut.

Type in “netsh wlan connect NetworkName”. Once again, NetworkName must be substituted with the SSID of your ad-hoc network.

Click Next and enter a fancy name such as “Connect to NetworkName” or something like that.

Click Finish and you’re done. This shortcut will run when Windows starts up, giving you a very brief flash of the black command window, followed by your computer connecting to the ad-hoc network if it is available. Tip: You can also pin the shortcut in your taskbar or copy it to the desktop to easily connect to the network any time you want.

Note: You will probably need Administrator access to complete some of the steps above (in both procedures).

Original Launch X431 V Wifi/Bluetooth connection setting steps

Launch X431 V with Bluetooth/Wifi based on Android system, is a new car malfunction diagnostic device developed by Launch Tech for internet application. X-431 V completely substitutes X431 IV and X431 Diagun III.
1
X431 V Highlights:
1. Supported Multi-Languages
2. Wi-Fi: Supported

3. Bluetooth: Supported
4. Easy to Update: Online update(One Year free update, after 1 year update cost is 650USD,130USD/time),
Support Online one-click update, no need to update the software to CF Card.
How X-431 V use WIFI?

Enter main menu screen, choose “Settings”→“Wi-Fi”.
Choose “Scan” from the pop-up option menu. X-431 V will start scanning all available Wi-Fi networks.
Choose the desired one to connect.

How X-431 V use Bluetooth?

Enter main menu screen, click “Settings” → “Bluetooth”.
When the Bluetooth switch is ON position, it indicates it is already on and a corresponding Bluetooth icon will appear on the status bar of X-431 PRO.

9 in 1 Truck Adblueobd2 Emulator carlist

ESobdii.com come the newest Truck AdblueOBD2 Emulator Box bypasses good working electronic module of the AdblueOBD2 system on vehicle. Its very easy to fit AdblueOBD2 Emulator Box to any truck or bus equipped with AdblueOBD2 systemand it will override AdblueOBD2 system instantly, it will stop the usage of AdblueOBD2 liquid.

adblueobd2-emulator-9-in-1-1

9 in 1 Universal AdblueOBD2 Emulator Vehicle List:
Mercedes, MAN, Scania, Iveco, DAF, Volvo, Renault ,Cummins , Ford Newly Add Ford
Support Trucks, Buses and Other Heavy Vehicles with EURO 4 and 5 Exhaust Emission Rates
1. AdblueOBD2 Mercedes trucks and other heavy vehicles (only with Borsch AdBlue system)
2. AdblueOBD2 MAN trucks and other heavy vehicles
3. AdblueOBD2 Scania trucks and other heavy vehicles
4. AdblueOBD2 Iveco trucks and other heavy vehicles
5. AdblueOBD2 Volvo trucks and other heavy vehicles
6. AdblueOBD2 DAF trucks and other heavy vehicles
7. AdblueOBD2 Renault trucks and other heavy vehicles
8. Ford cargo trucks and other heavy vehicles
9. cummins trucks and other heavy vehicles

New Launch X431 PAD II Introduction

The X-431 PAD II is the new high-end diagnosis solution. Using the open source Android OS for deep car analysis and work with its large number of special functions.

Dust and waterproof design (IP65), including docking station for DBSCar, EasyDiag and golo Full system diagnosis for more than 70 brands;
access to all available vehicle systems; coding, programming (key, immobilizer system) and service reset

Launch X431 PAD II Introduction:

New Genius Master vs Best Kess V2 Master

 

Product Name New Genius Kess V2(SE87-D)
Language English, Italian, German, French, Spanish, Portuguese,
Hungarian
English, German, Spanish, Italian, Portuguese, French
Software V2.15
Hardware V5.005.003 V4.036
Tokens No Tokens Limitation,30 Tokens
come with device by default, you
can press the tokens reset
buttonon the back of hardware
to get new Tokens
No Tokens Limitation, there is renew
buttonon the main unit. This button is
used to charge tokens. Once your tokens
run over, just click this button, then tokens
will go back to 30 tokens.
Update via hardware via hardware
Support Protocols Supports CAN-BUS, KWP and J1850 protocols Line, CAN, EDC17 and MED17 and Ford J1850
Support Vehicle Car, Bikes, LCV
Support more new vehicle than Kess V2
Car and Bike
PC Hand-held ECU Chip Tuning Tool,
no PC need; software is inside the
machine already directly to use
PC-based ECU Programmer,
you need install the software by yourself
Method Read and Write ECU via OBD2 directly same

Xhorse VVDI Mercedes Benz MB BGA tool Feedback

Xhorse VVDI MB BGA TOOL Function Introduction:

1. Support BE key, read password and prepare new key via IR.

2. NEC V051,V057 support on board get password
3. All NEC keys support on board write and erase
4. Password calculate:support BGA keys,NEC keys(include 51,57version)etc.,work fast.
5. Support renew EIS and ELV
6. Support write EIS and ELV
7. Support online generate key file
8. Unlock ELV function will be released soon.
9. Renew other control modules function will support soon
This is the Xhorse VVDI Benz BGA tool Feedback :

1. i test password from 212 new model super
good tool need pay 2 tokens
need 10 min all ok

2. Do you have see video of this tool?
They say can do all key lost on w212.
No tool can do it even Mehaco or nec pro51.

w212 eis on video, sure it can.. mehaco/mercedesinstrument can do all keys lost on w212.. the option is availible a few months..

3.I try to collect list of OK and K.O. experiences with IR pass reading with VVDI BGA TOOL
W210: EIS/EZS A208.545.01.08 – MCU ??? -read PSW IR – not successful
W210: EIS/EZS A210.545.02.08 – MCU 1D69J – read PSW IR – not successful
W210: EIS/EZS A210.545.03.08 – MCU 1D69J – read PSW IR – not successful
W210: EIS/EZS A210.545.00.08 – MCU 0D69J – read PSW IR – not successful
W215: EIS/EZS A215.545.00.08 – MCU 0D69J – read PSW IR – not successful
W215: EIS/EZS A215.545.08.08 – MCU 1L85D – read PSW IR – not successful
W203: EIS/EZS A203.545.05.08 – MCU ??? – read PSW IR – OK
W203: EIS/EZS A203.545.05.08 – MCU 1J35D – read PSW – OK
W203: EIS/EZS A209.545.09.08 – MCU 1L85D – read PSW IR – not successful
W220: EIS/EZS A215.545.02.08 – MCU ??? – read PSW IR – OK
W220:EIS/EZS A215.545.00.08 – MCU 1D69J read PSW IR – not successfulW639: EIS/EZS A639.545.05.08 – MCU 2x 1L02Y – read PSW IR – not successful
W639: EIS/EZS A639.545.09.08 – MCU 0L01Y – read PSW IR/OBD – not successful
I Can guarantee it will not read ANY WITH HC05
1D69J/0D69J cannot be read by IR alone – A calculation with kline is possible.
read a w203 A203.545.05.08 with mask 1J35d password ok
W203 IES 203 545 05 08 read PSW IR OK
W 220 IES 215 545 02 08 read PSW IR – OK

Only support parts of HC05, HC08 motorola eis(K line),if cannot support will show error, need to remove eis get eeprom. we have tested W215 ok, but not
means all W215 can support.in fact only support parts of this type.

Xhorse VVDI Benz BGA tool FAQ

Q: i tes read data with obd2 210 k line working and 204 car read with obd 2
but 211 not read with obd2

cable connect
16 12v
4+5 GND
14 CAN_L
6 CAN_H

pin 1 : ESL 1
pin 2 : GND
pin 3 : +12V (30)
pin 5 : CAN L (White)
pin 6 : CAN H (Green)
pin 7 : CAN L
pin 8 : CAN H

CAN ANY ONE TEST

A: read eis via obd for W164, W169, W211, W209, require gateway connected

Q: I bought EIS W221 lock with a key from the lock from one machine. I have read the PSW. I will make a complete loss of W221 key in the future?
Describe step by step procedure

A: you have uesd/2nd-hand EIS with working key,you can do like this for W221 all key lost
1.read all key lost EIS data-> save EIS data
2.read used EIS data enter password,get erase password->renew used EIS.
3.load step1 EIS data to renewed EIS with password->write EIS data
4.load EIS data(with key password)->prepare key file
5.input new key to device IR reader->load key file->write
6.insert new key to EIS->EIS will learn the new key->key learn success

by the way,if your all key lost W221 is motorola EIS,not need to change EIS,remove eis get eeprom by programmer(VVDI PROG).
then load eeprom to VVDI MB TOOL prepare key file.
Q: I have a w204 All key lost and i program a new EIS with VVDI, the ignition doesn’t come on or crank, but the steering can lock and unlock. can someone guide me what to do?

A: about W204 all key lost(change new EIS),refer to following steps,maybe helpful:
1.Read EIS data via obd,then Save EIS data
2.adapt ESL:Read ESL data->Get Erase Password->Renew ESL
3.Change new EIS, Load EIS data(step1)->write Key Password(enter manually and at random)->Write EIS data
4.Personalize W204 ESL
5.Load EIS data(with Key Password)->Prepare Key File
6.Input new Key to device IR reader->Load Key file->write
7.Insert new Key to EIS->EIS will learn the new key->key learn success

Digimaster 3 Odometer Correction Master Updated to 1.8.1606.25

Original YanHua Digimaster III odometer correction master has newly update to 1.8.1606.25 in ESobdii.com.
Supports English
Update: Online
Digimaster 3 Version: 1.8.1606.25

digimaster-3-digital-odometer-correction-master-1

 

 

 

 

 

 

 

 

Newly Update for Digimaster 3:

New added car models for odometer adjustment:
1 Hyundai IX25 93C66

New added car models for and airbag resetting.
1 Ford DV4T-14B321-DH 95640
2 Ford 737T-14B056-BB 95160
3 Mazda8 L20657k30 95160
4 SSangyong 86251-31040 95080

Main function of Digimaster III:
1. Odometer correction
2. Audio decoding
3. Airbage reset
4. ECU programming
5. PIN Code Reading
6. BMW key programming