Carprog Full V8.21 v9.31 software Free Download

Now,you can available CARPROG FULL V8.21 Firmware Perfect Online Version with All 21 Adapters Including Much More Authorization and free carprog v9.31 software

Free Download Carprog Full software:
Carprog V9.31(free, no activation)
http://www.chinaautodiag.com/download/carprog-9.31.zip

Carprog V8.21
http://www.chinaautodiag.com/download/carprog-full-v8.21-software.zip
(Needs activation but you will automatically get token renew after it used up)

Operating system: Win XP,Win7,Win8,Win10 32-bit
(Note: Disable anti-virus software program)

CARPROG FULL V8.21 Software:
ECU-OPEL – OPEL login reader from motor hybrid ECU. Works with Bosch ME1.5.5, Siemens SIMTEC71, SIMTEC71.1, Delco Diesel, Delco Multec.
OPEL CAN – Opel ECU by CAN programmer – read/change mileage in EDC16, MT35E, HSFI 2.2 read PIN, reset ECU
PSG16 – Opel PSG16 diesel pump by OBDII – read/change mileage, read PIN, reset ECU
OPEC28 – Opel Siemens Simtec ECU Tool Advanced

Magic Wand 4C 4D Transponder Chip Gnerator Manual

Magic Wand 4C 4D Transponder chip generator comes out, which not only generate 4D63, 83 40bit and 83 80bit chip but also is used to generate 4C chips original 4D70 blank Chip to 4D small capacity chips. Well, there is a detailed introduction of Magic Wand.

4

 

 

 

 

 

 

 

 

What is Magic Wand 4C 4D?
Power supply: Above 5v 1.5a usb charger, please charge the Magic Wand using
Android phone USB cable.
PS: You had better not use the sub-standard power supply because it will influence the function of magic wand ,leading to the magic WAND’s wrong.

Ford/Mazda immobilizer chips are 3 types available:
1. 4D63 (40bit/DST40) small capacity.
2. 83 (40bit/ DST40) small capacity.
3. 83 (80bit/DST80) big capacity.

 

a usages description of key button
Read
This button is used for reading chip. After you put the chip into the slot, press “Read” button and get the reading result. If it doesn’t succeed to read, the red indicator will continue flashing. While after reading successfully it will display, chip ID and the green indicator will keep flashing. At this time it is ready to copy, take out the chip and substitute the special chip for Magic WAND, press “Write” button and complete copying, after that it will display chip ID ,at the same time the green indicator will continue flashing, if it fails to copy, the red indicator will keep flashing.

Write ( This button is used to generate and copy chip)
Generate Chip: Put the chip into the slot , press the chip ID you want to generate, press “Write” button to get the results, the green indicator will keep flashing and display chip ID. In contrast, if the red indictor flashes it means reading is finished, maybe you put an error chip or the chip doesn’t match with the device.
Copy: you need to read out the chip ID before to copy, after it read out successfully you will get the chip ID, just press “Write” to finish copying. While if the red indicator flashes it means the chip doesn’t match with the device.

NOTES:when you add the key, you have to put the Magic Wand close to the ignition coil and the key go through the hole of Magic Wand, then follow the key programmer prompt to finish.
1.Put the original 4D70 blank chip into the chip slot.
2.Press the No. buttons 8 and 3, then press “Write” button, the green indicator will flash and means copy successfully.
3.Put the chip back into the key shell, then take it to the car to add key work together with key programmer.

 

Serial Suite Piasini Engineering V4.3 No Dongle Error solution

Here is the engineer solution to Serial Suite Piasini Engineering V4.3 master version ecu programmer no dongle error.

Device:
Super Serial Suite Piasini Engineering V4.3 Master

Software version:
Piasini v4.3
Symptom:

When the software is well installed and inserted the dongle, the program pops up “Safengine” error.

1

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

NOTE:

The PC with Windows XP and without anti-virus software…also well recognized the dongle…but every time open the program, the error without the dongle appears

Solution:

Uninstall the Serial suite Piasini dongle driver and firmware driver

Then the dongle error will be solved and works well as follows:

3

FMPC001 Ford/Mazda incode calculator update to V1.7

Hand-held FMPC001 Ford/Mazda Incode Calculator no token limitation new software V1.7 has newly released.
1. Latest version: V1.7
2. No need install software.
3. All hand-held calculate incode outcode for Ford and Mazda.
4. Support 6 digit outcode transfer to 4 digit.
5. Updated online.
6. Device come with 50 tokens for new models, each calculation cost 1 token. No deduction for old models.

How to update FPMC001 incode calculator to V1.7?
(Note:
1). Update will automatically add/recharge 50 tokens, no need to add token.
2).Do follow these steps, otherwise you will have update error.)

1. Connect FMPC001 to PC via USB cable
2. install drivers
3. copy FMPC DFU V1.1.exe and FMPC_V1.7 Upgrade.bin to desktop
4. rename: FMPC_V1.7 Upgrade.bin to 1.bin
5. start update

Carprog full v7.28 vs. v8.21 vs. v9.31

Carprog full v7.28 vs. carprog v8.21 perfect online version vs. carprog v9.31

1

 

 

 

 

 

 

 

2

 

 

 

 

Attachment: Carprog function list and adapter list

Carprog Airbag: 
S5.1 – VAG (Audi, VW, Skoda, Seat) Airbag Reset Tool
S5.2 – BMW Airbag Reset Tool
S5.3 – Mercedes Benz Airbag Reset Tool
S5.4 – FORD Airbag Reset Tool
S5.5 – GM Airbag Reset Tool by OBDII
S5.6 – CARPROG CR16 Airbag tool – Audi, Mercedes, Ford, Volvo
S5.7 – Renault Airbag reset tool
S5.8 – Peugeot Airbag Reset tool
S5.9 – Citroen Airbag Reset tool
S5.10 – Honda Airbag Reset tool
S5.11 – Audi Airbag reset tool by direct connection to EEPROM or MPU
S5.14 – Ford Airbag Reset tool by direct connection to EEPROM or MPU
S5.16 – Hyundai Airbag Reset tool
S5.17 – KIA Airbag Reset tool
S5.18 – Lexus Airbag Reset tool
S5.19 – Rover Airbag Reset tool
S5.21 – Mazda Airbag Reset tool
S5.22 – Mitsubishi airbag reset tool
S5.23 – Nissan Airbag reset tool
S5.20 – Mercedes Benz Airbag Reset tool by direct connection
S5.25 – Opel Airbag reset tool by direct connection
S5.27 – Saab Airbag reset tool by direct connection
S5.28 – Subaru Airbag reset tool by direct connection
S5.30 – Toyota Airbag reset tool by direct connection
S5.31 – Alfa Romeo Airbag Reset Tool
S5.32 – Fiat Airbag Reset Tool
S5.33 – Porsche Airbag Reset Tool
S5.34 – Suzuki Airbag Reset Tool
S5.35 – Volvo Airbag Reset Tool
S5.36 – Daewoo Airbag Reset Tool

  1. CarProg Dash:
    S7.1 – VAG CAN programmer
    S7.2 – CarProg Dashboard programming
    S7.3 – CarProg Dashboard programming package update
    S7.5 – Mercedes Benz ASSYST explorer
    S7.6 – VDO dash decrypt tool – Skoda Roomster, SuperB, VW Polo, Audi A3, A6, Allroad with 93C86 odometer change and PIN reading
    S7.7 – Ford odometer change by OBDII (by CAN)
    S7.8 – VW 2007+ by OBD – Golf, Passat, Eos, Touran, Tiguan, Octavia with Micronas by diagnostic
    S7.10 – VAG VDO dashboards by K-line OBDII diagnostic – VW T5, Passat B5, Skoda SuperB and others
    2J74YAUDI – Audi 2J74Y repair software for CarProg4. CarProg Immo:
    S4.1 – Toyota Key Programmer
    S4.2 – Lexus key programmer
    S4.3 – Daihatsu Key Programmer
    S4.4 – CarProg BMW Key programmer
    S4.5 – Mercedes Benz Key programmer
    S4.6 – RENAULT Megane/Scenic infrared key programmer
    S4.7 – Kessy tool – A8, Touareg, Phaeton, Cayenne PIN code reader
  2. CarProg Processor:
    S2.1 – CARPROG Motorola (Freescale) HC05 MPU programmer
    S2.2 – CARPROG Motorola (Freescale) HC11 MPU programmer
    S2.3 – CARPROG Motorola (Freescale) HC08 MPU programmer
    S2.4 – CARPROG Motorola (Freescale) 912 and 9S12 MPU6. CarProg Programmer:
    ST92 – ST92F120, ST92F150, ST92F250 internal EEPROM programmer7. CarProg Radio Code:
    S6.1 – CARPROG CC1
    S6.2 – CARPROG CC2
    S6.3 – CARPROG CCN
    S6.4 – Philips Car Radio decoder
    S6.5 – Renault Car Radio decoder by serial number
    S6.6 – Audi/VW/Seat/Skoda car radio decoding software
    RNS510 – Navigation decoding tool by Navi diagnosticCarProg Aaapters:

1: CarProg Main harware interface

2: A1 – OBD2 Adapter Cable (Inside have K-line and CAN bus switches. Use with all cars complained with OBDII standard)

3: D1 – Odometer-airbag Adapter  (Dashboard ,Airbag programming adapter )

4: A3 – Transponder Antenna ( Used with all CARPROG immobiliser software )

5: A10 – Motorola Adapter Cable  (Motorola MCU programing adapter )

6: A11 – BMW EWS Adapter Cable   ( Used with BMW Immo software )

7: A16 – Car radio Cable   ( Used for Opel, Renault, Peugeot, Citroen car radio made by Philips decoding)

8: A15 – Cable  (Used with D1 adapter ,Universal car dashboard and airbag programming adapter )

9: A17 – Honda Airbag OBD2 Cable  (Adapter for Honda airbag reset by OBDII )

10: A4 – Eeprom Adapter Cable   (Used for eeprom programming)

11: A5 – DIP8 Clip Cable   (DIP8 Clip for eeprom programming)

12: A6 – SOIC8 Clip Cable   (SOIC8 Clip for eeprom programming)

13: A7 – MB 38-Pin Cable   (Used with MB Airbag and dashboard software)

14: A8 – BMW 20-Pin Cable (Used with BMW airbag and dashboard software )

15: RNS510 Adapter Cable  (RNS510 radio decoding interface cable )

16: VOLVO FORD CAN 2006+ Cable   (Needed for airbag and dashboard programming)

17: FIAT CAN 2006 Cable   (Needed for airbag and dashboard programming)

18: C1 OBD2 Female Cable

19: USB Cable

20: Power cable

21: CD   (Software V9.31)

 

Digimaster 3 Odometer Correction Master update to V1.8.1604.20

ESobdii.com Digimaster III updated to the newest Version: 1.8.1604.20

digimaster-3-digital-odometer-correction-master-1
New added car models for odometer adjustment,airbag resetting,writing Benz BE(NEC) key and VW Immo function.

New added car models for airbag resetting:
1 Mazda SA10-57-K30M1
2 Mazda SA11-57-K30M1
3 KIA Sportage R 95910-4T000

New added car models for odometer adjustment:
1 SSangYong Korando 93C66
2 Ford Focus 2010
3 Opel Astra DIAG 2009- (Only Available for Test user)
4 Benz(OBD) A Class W176
5 Benz(OBD) B Class W246
6 Benz(OBD) CLA Class W117
7 Benz(OBD) ML Class W166
8 Benz(OBD) SL Class R231
9 Benz(OBD) SLK Class R172
10 Volvo(OBD) XC60 2008-
11 Skoda(OBD) Superb 2008-
12 Ford(OBD) Mondeo 2008-
13 GM(OBD) Chevrolet Aveo (Only Available for Test user)
14 Audi(OBD) A1 -2013(Only Available for Test user)
15 Audi(OBD) Q3 -2013(Only Available for Test user)

New added Wiring diagram:
1 Meter system
-BMW 5 series F10/F11/F18(2010-) 5M48H/1N35H
-BMW 5 series GT F07 (2010-) 5M48H/1N35H
-BMW 6 series F12/F13(2011-) 5M48H/1N35H
-BMW 7 series F01/F02(2009-) 5M48H/1N35H
-BMW X3 F25(2011-) 5M48H/1N35H

2 Immo system (Super BDM adapter under Automatic Mode need to read EEPROM / Dflash data)
-BMW 1 series F20(2011-) 5M48H/1N35H
-BMW 5 series F10/F11/F18(2010-) 5M48H/1N35H
-BMW 5 series GT F07 (2010-) 5M48H/1N35H
-BMW 6 series F12/F13 (2011-) 5M48H/1N35H
-BMW 7 series F0X (2008-) 5M48H/1N35H
-BMW X1 (2010-) 5M48H/1N35H
-BMW X3 F25 (2011-) 5M48H/1N35H

New added function for VW immo:
1 Jetta 2010- Key learning
2 3th-generation Immo Key matching (CAN)
3 3th-generation Immo Romete Matching (CAN)
4 3th-generation Immo Read security code(KWP1281) System Type 1
5 3th-generation Immo Read security code(KWP1281) System Type 2
6 3th-generation Immo Keys matching(KWP1281)
7 3th-generation Immo Romete Matching(KWP1281)
8 3th-generation Immo Read security code(KWP2000)
9 3th-generation Immo Keys matching(KWP2000)

New added models for writing BEN BE(NEC) key:
1 S Class
2 CL Class
3 SL Class
4 E Class
5 CLK Class
6 CLS Class
7 C Class
8 V Class

Lexia-3 DiagBox software updated to V7.76

ESobdii.com Lexia-3 DiagBox software updated to V7.76 .

Hardware and Software Requirements:
Intel Celeron/Pentium III 400 MHz

128 MB RAM

50MB free HDD space

USB 1.1 port (USB 2.0 recommended)

Microsoft Windows 98 SR2/2000/XP with the latest service pack installed; Windows XP system better.

Please setup the software according to the requirements to hardware and software. Otherwise it will fail to setup and bring you much trouble.

Language
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech

Main steps OF install the Diagbox software:

Step 1 – Install DAEMON Tools Lite

Step 2 – Install Diagbox

Step 3 – Activate Diagbox

Step 4 – Update Diagbox to v7.57

Step 5 – Update Diagbox to v7.58

Step 6 – Update Diagbox to v7.62

Step 7 – Update Diagbox to v7.66

Step 8 – Update Diagbox to v7.74

Step 9 – Update Diagbox to v7.76

Step 10 – Run Diagbox 7.76 to diagnose Citroen XM