Newly JDiag Elite J2534 Diagnostic and Coding Programming Tool

JDiag is the most validated and accepted J2534 device in the world. It has been on the market longer than any other J2534 device, it has been approved by more automakers than any other product, and has been called the “golden standard” by customers and competitors alike.










To Get JDiag Elite J2534 for 4 Reasons:

1. Module Programming, diagnostic functions, key programming, data monitoring.
2. With JDiag Tablet touch screen.
3. Software pre-installed.
4. Free update for lift time.
5. Three systems are available in the tablet,2 WIN7,64Bit;1 WIN8.1,64Bit
Kindly Note: Turning on the PC,you will need to choose a system,and all the systems is installed.
There are three kind of connection methond, USB,WIFI and LAN Cable.
But now, WIFI can not be used

The JDiag offers a wide range of capabilities to help you grow your business and retain customers including:
1.Module Programming
2.Diagnostic Functions
3.Key programming
4.Data monitoring

J2534 Technical Specifications:
Bus Protocols:
CAN Bus (capable of ISO 15765, GMLAN, J1939, and ISO14229)
2nd CAN (Dual or Single Wire)
Ford SCP (J1850PWM)
GM Class2 (J1850VPW)
KWP2000 (ISO9141/14230)
Chrysler SCI (J2610)

Vehicles List:
JDiag is compatible with many brands cars all over the world, and more brands is still under developing. List brands are tested:

USA: (7 Cars)


Europe: (20 Cars)

BMW, BMW MINI, Rolls-Royce, VW, Audi, Skoda, Seat, Lamborghini, Bentley, Jaguar, Land Rover, Volvo, Bugatti, Mercedes-Benz, Smart, FUSO, Maybach, Setra, Cobus, , Ford (EU)

Japan: (9 Cars)

Honda, Acura, Toyota, Lexus, Scion, Nissan, infiniti, GTR, Subaru (immo and programming only)

FVDI commander with whole 19 software new add honda

FVDI Full Version Highlights:
1. The most powerful diagnostic tool supports full system obd2 tool in the world, with diagnose, key program, ecu program, immo read, airbag function in one unit, including 19 software.
2. Supports Multi-langauge,
3. No IP limited, No tokens need, No time limitation
4. Newly adds more special functions, such as Mileage recalibration, key learning/programming, Read/Program flash memory, Exchange speed limit, Coding calculator and so on.
5. Supports multi-brands vehicles include VAG, Mercedes, Porsche, Opel, BMW, Peugeot, Citroen, Fiat, Renault, Toyota, Lexus, Hyundai, KIA, Nissan, Ford, Volvo, Chrysler, Dodge and Jeep, Mitsubishi, and TAG Key Tool,and newly release soon DAF, Bike, Snowmobiles and Water scooters.

FVDI Full Software Version:
1.VAG – VW, Audi, Seat, Skoda: V24.0
2.Mercedes/Smart/Maybach: V7.0
3.BMW: V10.4
4.Porsche: V4.1
6.Peugeot/Citroen: V6.7
7.Fiat/Alfa/Lancia: V5.7
8.Renault: V6.3
9.Toyota/Lexus: V9.0
10.Hyundai/KIA: V2.1
11.Nissan/Infiniti: V4.3
12.TAG Key Tool: V6.2
13.Ford: V4.9
14.Volvo: V4.3
15.Chrysler, Dodge and Jeep: V3.3
16.Mitsubishi: V2.1
17.DAF: V1.0
18.Bikes, Snowmobiles and Water scooters: V1.2

How to update Foxwell NT510 Scanner

Orginal Foxwell NT510 Multi-System Scanner with 1 Car Brand Software+OBD comes with 18 month free update online.

To update your scanner, please follow the three steps as below:
Step1: Obtain an FOXWELL ID.
Step2: Register the product with the product serial number and product password.
Step3: Update the product by the update application FoxScanner.

1 Update the Scanner
To update scanner, you need the following tools:
● The scan tool
● PC application FoxScanner
● PC or laptop with USB ports and Internet explorer
● Internet service
● TF card reader
To be able to use update tool, PC or laptop must meet the following minimum requirements:
● Operation System: Win98/NT, Win ME, Win2000, Win XP, VISTA, Windows 7, Windows 8 and Windows 10.
● CPU: Intel PⅢ or better
● RAM: 64MB or better
● Hard Disk Space: 30MB or better
● Display: 800*600 pixel, 16 byte true color display or better
● Internet Explorer 4.0 or newer

Please Kindly Notice:
Before updating, please make sure your network works correctly.
Before updating, please make sure you have already created a Foxwell ID.

MB SD C4 Dell D630 “windows is not genuine” solution

Here is the solution to Dell D630 (comes with the Mercedes MB SD C4 diagnostic scanner) windows is not genuine solution.

A customer has got the MB SD Connect C4 2016.03 SSD and Dell D630 package. When power up Windows 7 system, the system display error “windows is not genuine. Your computer might be running a counterfeit copy of Windows ” and ask to enter product ID.


Select “Ask me later” first
If you running Win7 SSD on Windows 7 O/S, download Dell D630 win7 active file. Run as Admin and restart the computer.

Multi-Diag Access J2534 I-2015 Install steps come the New I-2015 Multi-Diag Access J2534 Pass-Thru OBD2 Device
 Here’s Top 4 Reasons to Get I-2015 J2534:
1. Latest Version: V2015.01
2. Support Multi-languages: English/ Spanish/ German/ French/ Italian/ Portuguese/ Bulgarian/ Croatian/ Czech/ Danish/ Dutch/
Finnish/ Hebrew/ Hungarian/ Polish/ Romanian/ Russian/ Serbian/ Slovenian/ Swedish/ Turkish
3. Support 23 Brands Updated, 5300 New Systems
4. Operating System: Windows XP; Windows 7 32bit
This is the install video:

TPX1 TPX2 TPX3 cloning chips difference

What are TPX1 TPX2 TPX3 and what are the differences from transponders? Check little information below:

TPX is a type of transponder of JMA manufacture.
It’s clonable transponder. With TPX1 TPX2 TPX3, TPX4 (new model replace the old TPX3), now TPX5(Tpx5=tpx1+tpx2+tpx4 3-in-1)you can clone all transponder.

TPX1 is for Texas fixed transponder (many Toyota, MITSUBISHI, Mazda, ford…)

TPX2 is for TEXAS CRYPTO (many Toyota, MITSUBISHI, Mazda, ford and some PEUGEOT CITROEN and Renault)

TPX3 and TPX4 is for all Philips CRYPTO II.

TPX1 for copying 4C

TPX2 for copying 4D keys/chips

TPX3/4 for copying PCF7936 (ID46)

Locksmith experience:
1. TPX1, TPX2 Chinese, work fine with TMPro2, AD900 pro, JMA TRS5000,Zed bull checked!!!

2. You have to buy CN900 to be able to use CN1, CN2. CN1 and CN2 are NOT compatible with TPX1, TPX2 and TPX3 at all.

I have used about 200 of CN1 / CN2 for 4C and 4D cloning on CN900 key programmer, and 30 of Cn3 for 46 cloning. They are so good and so nice to use. DO NOT get me wrong I still own my TRS5000 genuine although I hardly use it. I can use these Chinese chips (CN1, CN2 and CN3) to clone 4c , 4D , 46 and insert them into remote key shell, why bother programming if you can clone, safer and no hassle. the price for these Chinese chips are much cheaper than TPX1,2,3,4. on average they are about 5~8 use dollars.

3. Got TPX1 to work on clone zed bull, but can’t get it to write twice. Because Chinese TPX1 can only be written once.

4. I got TXP2 from apollo auto used with AD900 worked fine.

UPA USB “usb device not recognized” solution

One customer write to me: My UUSP upa was working fine, and today it say’s usb device not recognized, I try with dump from v1.2 but working only one time after disconnect and connect again same usb device not recognized

Here is dump from upa version 1.3 – for 24c128:!To9VXBYI!l1TpfyO2GWQUUZmP2YqwANvhGEv3HjUQIuQa8Cux8jQ, please download it firstly.

If the eeprom dump works fine the first time, but after usb disconnect and reconnect again it show upa usb device not recognized again, try one of these two solutions:
1) fill eeprom with FF and after connect it ask me to update eeprom, update now it’s working fine.

2) you need to change this N15. N15 is fuse, value about 0R.

GM tech2 TIS2000 software install steps

Step-by-step TIS2000 software dongle installation:


1) Insert TIS2000 software CD into the laptop
2) Install the setup driver in the CD
3) Select Activator. Select first one Activator hardware key
4) Load DATA DVD (tis2000+data+0802) to run TIS200 on desktop after compete install the setup. TIS2000 will update the data automatically.
5) Find out and locate SuperPro.dll file in TIS2000 crackfile folder after update data and copy the SuperPro.dll file to “C:Program filescosidsbin”
6) Then run TSI2000 software
7) Connect GM Tech2 device with computer
8) Start ECU programming and follow the windows prompts.